I Purpose
Rubber and its products used to test the resistance to ozone aging performance the equipment perform (meet) Standard: JIS K 6259ASTM1149 ISO1431 GB/T7762 GB/T13642 etc.
Two basic principles
Small amounts of ozone in the atmosphere, but is a major factor in cracking of the rubber, the ozone aging the box analog and strengthen the ozone in the atmospheric conditions, study ozone on the the rubber role of law, the rapid identification and evaluation of rubber anti-ozone aging performance antiozonant of protective efficacy of the method, and to adopt effective anti-aging measures, in order to improve the life of rubber products.
Three main features
* Stainless steel test positions in line with international standards and the silent discharge fully enclosed manufacturing ozone gas loop, the occurrence of the ozone gas and capture the closed loop to ensure their personal safety.
* Within in 1000pphm scope of arbitrarily set the ozone concentration.
* Speed motor-driven sample holder device
(Tensile test to meet the static method, the trajectory of the specimen meet cycloid trajectory principle)
* Ozone concentration automatic digital control instrument.
* Double beam "QUA" non-dispersive ultraviolet ozone detector.
* Digital automatic online measurement.
* Left the metrological verification correction interface.
* Ozone concentration / temperature and humidity settings control PID self-tuning, reliable and easy to operate.
* 3rd generation - Bill Lambert measurement application software.
* Security door lock control system
Main technical parameters
* Studio volume:
Model Studio Size (DxWxHmm)
CRS-CY100 450 × 450 × 500
CRS-CY 150 500 × 500 × 600
CRS-CY 250 500 × 650 × 700
CRS-CY 500 700 × 800 × 900
CRS-CY 800 800 × 1000 × 1000
CRS-CY 010 1000 × 1000 × 1000
CRS-CY 015 1000 × 1000 × 1500
* Ozone concentration: 0 ~ 500 pphm (set direct reading)
* Ozone concentration deviation: 10% of the GB
* The test positions Temperature: measurement range at room temperature ~ +80 ℃
* Temperature uniformity: ¡± 2 ℃
* Relative humidity: more than 60% of the measuring range
* Sample holder rotation speed: 0 to 50mm / s
* Dynamic pulled Frequency: 0.5Hz
* New sample holder (each fixture can be installed the test pieces stretching to meet the type Ⅰ the dumbbell and actual workpiece)
* Test gas flow rate: 0-60L/min